• The SUPERPAR 64 CLASSIC is a spotlight for PAR 64 lamp, specially designed for rental companies; with classic form, with long body in two sections, with square filter frame and polish finishing.
• The projector is fitted with a GX16 lamp socket with PVC cable 3 x 1,5 mm2 1 m and cable seal.
• Front protection grill with dense grid mesh
• The top-quality ceramic bulb socket features chromed contacts for higher contact efficiency; what is more, the leads are screwed on, not soldered onto the bulb socket, and are kept under pressure by helicoidal springs. This ensures a long lasting grip and greater electric safety and makes replacing the lead easier.
• D.T.S. uses top-quality 99/5 aluminium for the SUPERPAR 64 CLASSIC LUX body.
• The body thickness has been enlarged to 25/10, offering greater strength and incredible resistance to knocks and heat, together with a superior polish.
• The brecket thickness has been enlarged as well.
• The edge is not sharp and is therefore safer; it is stronger and conveys extra strength to the body; it is better finished, making the SUPERPAR 64 CLASSIC LUX more elegant.
• The SUPERPAR 64 CLASSIC LUX features a hinge holding front and rear parts.
• The projector features a lamp rotation system for orientating the beam; the rear ventilation hole has no grill for enabling the lamp adjustment.
• Lamp holder spring is held by a special keying.
• The internal double plate + clutch system of the SUPERPAR 64 CLASSIC LUX is preferable to other systems that corrode aluminium or don’t offer a good grip. This ensures safer operation because it permits 0° ÷ 90° rotation (as requested by EN 60598-1 e EN 60598-2-17 international safety standards) and the par can cannot take up positions that are hazardous for the inflammable surfaces above the par can itself.
• Unlike ordinary par cans, the gelatine bearing hooks are spoked to better adhere to the body, thereby ensuring greater strength and indeformability.

SUPERPAR 64 CLASSIC LUX (03.P64.10.02.00)
• Polish finishing
SUPERPAR 64 CLASSIC BLACK (03.P64.10.01.00)
• Black colour

ACCESSORIES
• “C” clamp G50 Black (max. load 10Kg)  (cod. 0521A012)
• “C” clamp G50 Chrome (max. load 10Kg) (cod. 0521A012.20)
• Safety wire  (2mm x 40 cm), Ring spring catch, Max. capacity load 10Kg. (cod. 0521A009)
• Floor-stand for Parcan projectors. Colour: Black (cod. 0521A013)
• Floor-stand for Parcan projectors. Colour: Chrome (cod. 0521A013.20)
• Gel filters (see page 139)
• Red dichroic filter (cod. 0507C057)
• Green dichroic filter (cod. 0507C056)
• Blue dichroic filter (cod. 0507C058)
• Yellow dichroic filter (cod. 0507C055)